The XIP-90200-000 transition module plugs into the rear backplane directly behind the carrier board. The field I/O connections are made through the backplane to P0 and P2 connectors of the carrier board and then routed to four SCSI-2 Connectors on the transition module (marked IP module slots A through D) for rear exit from the card cage. It is available for use in VME64x bus card cages that provide rear exit for I/O connections via transition modules.

Transition modules can only be used in card cages specifically designed for them. It is a double-height (6U), single-slot module with front panel hardware adhering to the VME64x bus mechanical dimensions and IEEE Standard (1101.11-1998), with a printed circuit board depth of 80mm, which is a standard transition module depth. The transition module connects to Xycom Termination Panel, Model XIP-95025-552, using SCSI-2 to Flat Ribbon Cable, Shielded (Model 95028-187) to the rear of the card cage, and to XME-9670 boards within the card cage.

Application
To repeat field I/O signals of IP modules A through D for rear exit from VME64x card cages.