AGP-3500T
type:
AGP3500-T1-AF
type:
AGP3500-T1-D24
Memory: 8MB FEPROM
10.4 inch TFT Colour LCD
Display Resolution: 640 x 480 pixels
65,536 Colours
シリアルI/F(COM1) シリアルI/F(COM2) USB I/F 2ch CFカードI/F イーサネットI/F AUX/サウンド出力I/F 拡張ユニットI/F VMユニットI/F
Specifications with dotted lines will be supported by the next version of GP-Pro EX.
    VM unit and expansion unit cannot be used simultaneously by AGP-3500T.

Functional Specification
  AGP3500-T1-AF AGP3500-T1-D24
Display Type TFT Colour LCD
Display Colours 65,536 Colours (no blink) / 16,384 Colours (3-speed blink) *1
Backlight CCFL (Service life: 50,000 hrs. at 25 oC and 24 hr. Operation)
Display Resolution 640 x 480 pixels
Effective Display Area 211.2mm [8.31in.] x 158.4mm [6.24in.]
Brightness Control 8 levels of adjustment available via touch panel
Contrast Adjustment -
Language Fonts Japanese: 6962 (JIS Standard 1&2)(including 607 non-kanji characters)
ANK: 158 (Korean fonts, Simplified and traditional Chinese fonts are downloadable.)
Text
Composition
Character Sizes Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 dot fonts, Stroke font: 6 to 127 dot fonts (Full-size character: 12 to 254 dot fonts)
Font Sizes Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times *2
Text 8 x 8 dots 80 Char. x 60 rows
8 x 16dots 80 Char. x 30 rows
16 x 16 dots 40 Char. x 30 rows
32 x 32 dots 20 Char. x 15 rows
Memory Application 8MB FEPROM *3
Data Backup 320KB SRAM *4
Touch Panel Type Resistive Film (analog)
Resolution 1024 x 1024
Interface Serial Interface (COM1) Asynchronous Transmission: RS-232C/422/485 *5
Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits
Parity: none, Odd or Even
Data transmission speed: 2400bps to 115.2kbps, Connector: D-Sub 9pin male
Serial Interface (COM2) Asynchronous Transmission: RS-422/485 Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: none, Odd or Even
Data transmission speed: 2400bps to 115.2kbps (MPI: 187.5kbps to 12Mbps *6)
Connector: D-Sub 9pin female
Ethernet Interface IEEE802.3u, 10BASE-T/100BASE-TX
modular jack connector (RJ-45)
USB Interface USB1.1, USB TYPE-A connectorx 2
CF Card Interface CF Card Slot (TYPE-II) x 1
VM Unit Interface VM Unit Interface x 1
Sound Output Speaker Output 70mW (Rated Load: 8Ω, Frequency: 1kHz), Connector: Two piece type terminal block
AUX Input/Output [AUX Output] Alarm Output, RUN Output, Buzzer Output, Rated Voltage: DC24V, Rated Current: 50mA,
[AUX Input] Remote Reset Input, Input Voltage: DC24V, Input Current: 6mA, Operating Voltage: (When ON) DC9V or more, (When OFF) DC2.5V or less

General Specification
  AGP3500-T1-AF AGP3500-T1-D24
Rated Voltage AC100V to AC240V DC24V
Rated Voltage Range AC85V to AC265V DCV19.2 to DC28.8V
Allowable Voltage Drop Shorter than 1cycle (Instantaneous power failure time: 1s or less) 10ms or less
Power Consumption AC100V 0.9A or less, AC240V 0.45A or less 50W or less
Voltage Endurance AC1500V 20mA for 1 minute (between charging and FG terminals) AC1000V 20mA for 1 minute (between charging and FG terminals)
Insulation Resistance 10MΩ or higher at DC500V (between charging and FG terminals)
Operating Temperature 0 oC to 50 oC *7
Storage Temperature -20 oC to +60 oC
Humidity 10%RH to 90%RH
(Non-condensing, wet bulb temperature: 39 oC or less)
Storage Humidity 10%RH to 90%RH
(Non-condensing, wet bulb temperature: 39 oC or less)
Pollution Degree Pollution Degree 2
Corrosive Gasses Free of corrosive gasses
Atmospheric Endurance (GP Operation Altitude) 800hPa to 1114hPa (2000 meters or lower)
Vibration Resistance IEC61131-2(JIS B 3502) compliant
5Hz to 9Hz Single amplitude 3.5mm9Hz to 150Hz Fixed acceleration 9.8m/s2 X,Y,Z directions for 10 times (100min.)
Noise Immunity (via noise simulator) Noise Voltage: 1500Vp-p Pulse Duration: 1μs Arise Time: 1ns Noise Voltage: 1000Vp-p Pulse Duration: 1μs Arise Time: 1ns
Electrostatic Discharge Immunity 6kV (complies with EN 61000-4-2 Level 3)
Grounding 100Ω or less, or your country's applicable standard *8
Ratings (For front panel of installed unit) Equipment to IP65f NEMA #250 TYPE 4X/13 *9
External Dimensions W270.5mm [10.65in.] x H212.5mm [8.37in.] x D57mm [2.24in.]
Weight 2.5kg (5.5lb) or less
Cooling Method Natural air circulation
*1 Changing the Colours setting to "65,536 colours" will disable the blinking feature on all screens in your project. If you wish to use the blinking feature, select "16,384 colours".
*2 Font Sizes can be set up by software.
*3 User area.
*4 A Lithium battery's lifetime is:
10 years when the battery's ambient temperature is 40 oC or less.
4.1 years when the battery's ambient temperature is 50 oC or less.
1.5 years when the battery's ambient temperature is 60 oC or less.
When used for back up:
Approximately 60 days, with a fully charged battery.
Approximately 6 days, with a half-charged battery.
*5 RS-232C and RS-422/485 are software switchable.
*6 SIEMENS SIMATIC S7-200/300/400 series (MPI port only). Please contact your Pro-face sales representative for supported models and other details.
*7 Operating temperature refers to temperature inside monting enclosure.
*8 Grounding requirements differ from country to country. Be sure to confirm your work environment requirements prior to installation. For more information, please contact your local Pro-face office.
*9 The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.


External Dimensions, Parts Names
Expand: Click image.

Display
Touch Panel
Status LED
This LED indicates the GP's status, e.g. power input, firmware RUN status or backlight condition.
LED GP Status
Green (lit) Normal operation (power is ON.) or OFFLINE operation.
Orange (lit) Backlight burnout is detected.
Orange (blinking) During software startup.
Red (lit) Power is ON.
Not lit Power is OFF.
Expansion Unit Interface 1
Connects expansion units with communication features.
Ethernet Interface (LAN)
The Ethernet transmission interface conforms to IEEE802.3u (10BASE-T/100BASE-TX).
An RJ-45 type modular jack connector (8-pole) is used.
The LED turns on or off to indicate the current status.
LED GP Status
Green ON Data transmission available
Green OFF No connection or subsequent transmission failure
Yellow ON Data transmission is occurring.
Yellow OFF No data transmission
USB Interface (Host) (X2)
Conforms to USB1.1. (TYPE-A conn.) Connects a data transfer cable or USB-compatible printer. The maximum communication distance is 5m.
Expansion Unit Interface 2
Connects expansion units with communication features.
VM Unit Interface
This interface is equipped with the unit for extending a display function.
Auxiliary Input/Output /Voice Output Interface (AUX)
This interface is External Reset, Alarm Output, Buzzer Output, and sound output.
CF Card Access LED
This lamp lights up when CF card is inserted and CF card cover is closed.
However if cover is opened while card is being accessed, light will remain lit.
Access Lamp Indicates
Green ON The CF Card is inserted and the CF Card Cover is closed.
Or, the CF Card is being accessed.
Green OFF The CF Card is not inserted or is not being accessed.
Power Input Terminal Block
Connect the power cable.
CF Card Cover
The CF Card I/F and Dip Switches are located in the CF Card Cover open.
This cover must be closed when accessing the CF Card.
Serial Interface (COM1)
RS-232C/RS-422/RS-485 serial interface. D-sub 9-pin plug type connector. Communication method is switched via software.
Serial Interface (COM2)
RS-422/RS-485 serial interface. D-sub 9-pin socket type connector.


Catalog PDF
For further information, see the following PDF file.

GP3000 Series Catalog (Nov. 2005)
PDF:4,502KB

 
- All product names used in this page are the registered trademarks of their respective companies.
- The unit's photos contained in this page may differ from those of the actual product.
- All information in this page is valid as for December, 2005.
- All information contained in this page is subject to change without notice.

Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.



GP3000 Series  
AGP-3750T
AGP-3650T
AGP-3600T
AGP-3560T
AGP-3510T
AGP-3500T
AGP-3500S
AGP-3500L
AGP-3400T
AGP-3400S
AGP-3300T
AGP-3300S
AGP-3300L
AGP-3301S
AGP-3301L
AGP-3302B
AGP-3200T
AGP-3200A
 
Features
- Beauty
- Speed
- Connectivity
- Communication
- Global Reliability
- Compatibility
System Structure (PDF:113KB)
Options
Supported Drivers
New Screen Creation Software
"GP-Pro EX"
--> Operating Environment
Data Management
Software

"Pro-Server EX"
--> Features
--> Operating Environment
Support Site
"Otasuke Pro!"
 
   TOP
 
 Copyright (C) 1996-2008 Digital Electronics Corporation   All rights reserved.