Interfaces

PL-7931T

A. Ethernet Connector (LAN)   Network Interface ×2 Port (meets IEEE802.3 standard/10BASE-T/100BASE-TX auto-changeover). B. PCI/ISA board Expansion Slot   Available to use commercial PCI/ISA bus compatible boards. From the front face side, the slot names are dubbed as the first slot, the second slot, the third slot, and the forth slot.*1 *1 For the 4 slots type(PL-6930 and PL-7930) , the first slots is available only for ISA bus and the second slot is only available for PCI bus. For the 2 slots type(PL-6931 and PL-7931) the first slot is available only for ISA bus.   C. PCMCIA/CARD BUS slot   Available to use a commercial PCMCIA card / CARD BUS (CARD BUS excepts functions of ZOOMED VIDEO, and SOUND, however). D. RS-232C Connector(COM2)   These RS-232C interfaces (D-sub 9 pin male connectors), allow communication with other computers and connection to peripheral devices. The COM2 and COM3 ports are switchable for RI/+5V. E. RS-232C Connector(COM3)   These RS-232C interfaces (D-sub 9 pin male connectors), allow communication with other computers and connection to peripheral devices. The COM2 and COM3 ports are switchable for RI/+5V. F. a:USB Connector (USB)   USB 2.0 compatible devices can be connected here.   b:Hardware Reset Switch (RESET)   G. HDD/CF card unit expansion slot   These slots aim at installing HDD units or CF card units. From the front face side, the slot names are dubbed as the expansion slot0, and the expansion slot1.

Part Names

1. Display 8. Sound I/O Interface (Speaker output,Line input and Microphone input.) 2. Touch Panel 9. Half Cover 3. Power Lamp LED/RAS Status Lamp 10. Power Switch 4. RS-232C Connector (COM1) 11. Rear Maintenance Cover 5. RS-232C Connector (COM4) 12. USB Connector(USB2.0) ×2 Port 6. IDE Cover     7. Power Connector

Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.