 |
 |
|
PS-3450A Features / Specifications |
 |
 |
| Model: PS3450A-T41 |
 |
Intel® ULV Celeron® M 1.0GHz |
 |
DDR DRAM : 256MB to 1GB |
 |
8.4 inch. SVGA (800 x 600 dots)
TFT colour LCD |
|
-> Features |
|
-> Specifications |
|
 |
|
|
|
PC/AT
compatible panel computer |
|
Allow HDD or CF card to startup |
|
Memory (DDR DRAM : 256MB to 1GB) |
|
Supports
Windows®2000/Windows®XP/ Windows®XP Embedded |
|
Expansion
Slot PCI Bus Support (1 slot) |
|
AC100 to 240V
power supply |
|
TFT liquid crystal (8.4in. SVGA) |
|
High
resolution (1024 x 1024) with a touch
panel |
|
Intel® ULV Celeron® M 1.0GHz
CPU |
|
Supports
touch
panel mouse emulation function |
|
RAS
function |
|
Aluminium
die-cast body |
|
Equivalent
to IP65f |
|
UL and CE marking standard |
|
Build-to-Order |
|
PC/AT
standard I/F (COM x 2, USB x 4, LAN
x 2, Speaker Out) |
|
Supported RoHS Compliant |
|
|
| |
| Specifications |
| |
| Performance Specifications |
 |
 |
| Model |
PS3450A-T41 |
Conforming to Standards
|
UL508, CSA-C22.2, No.142-M1987, EN55011 Class A,
EN61000-6-2 and EN60950-1 |
Supported OS
|
Windows®2000 /
Windows®XP /
Windows®XP
Embedded |
| CPU |
Intel® ULV Celeron® M 1.0GHz |
| BIOS |
FirstBIOS Embedded Pro (Phoenix Technologies Co.) |
| Main Memory |
1Slot (Max.1GB) SO-DIMM socket 256MB to 1GB (PC2700) |
| Graphics |
SVGA (800 × 600 dots) |
| Video Memory |
Max.64MB (When using Windows®) UMA Type |
| Display |
Display Type |
TFT Colour LCD (8.4inch) |
| Display
Colours |
260,000 Colours |
Display Dots
(pixels) |
800 × 600 pixels |
Effective Display Area
(W × H ) |
172.4mm [6.79in.] × 129.8mm [5.11in.] |
| Backlight |
CFL (Irreplaceable) |
| Touch Panel |
Type
|
Resistive Film (Analog) |
| Resolution |
1024 × 1024 |
| Interfaces |
Serial Interface
(RS-232C) |
COM1 |
D-sub 9 pin (plug) |
| COM2 |
D-sub 9 pin (plug)
(RS-422/RS-485 switch possible. RI/+5V switch
possible) |
| USB Interface |
USB 2.0 compatible rear 4 ports |
| LAN |
Rear 2 ports.
This interface uses an RJ-45 type modular jack connector
(8 pins).
LAN1:auto change to 10BASE-T/100BASE-TX
LAN2:auto change to 10BASE-T/100BASE-TX/1000BASE-T, corresponding to Wake On LAN feature |
| Sound |
SPEAKER OUT
Rear 1 port (A standard type AUDIO jack is used.) |
| Disk |
IDE I/F |
Primary Master*1: 2.5inch HDD I/F
Primary Slave*1: CF Card I/F
Secondary Master: CF Card I/F |
| PCI |
Rev.2.2 compatible PCI I/F (5V) 1 Port |
| * |
To change the Master/Slave setting of Primary IDE
I/F, set Serial Mode Select switch #9 pin on the circuit board to the desired position. |
|
|
| |
| General Specifications |
 |
 |
| |
PS3450A-T41 |
| Electrical |
Rated Voltage |
AC100 to 240V |
Allowable Voltage Drop |
Shorter than 1 cycle
(Note that pause occurrences
must be more than 1 second apart) |
Power
Consumption |
120VA or less |
| Voltage Endurance |
AC1500V 20mA for 1minute
(between charging and FG terminals) |
Insulation
Resistance |
DC500V 10MΩ(min.)
(between charging and FG terminals) |
| Environment |
Surrounding Air Temperature |
0°C to 50°C: without HDD
5 to 50°C: with HDD |
| Storage Temperature |
-20°C to +60°C |
| Ambient Humidity |
10 to 90%RH
(Non condensing, wet bulb temperature: 39°C or less.
Wet bulb temperature with HDD: 29°C or less.) |
Ambient
Storage
Humidity |
10 to 90%RH
(Non condensing, wet bulb temperature: 39°C or less.) |
| Corrosive gas |
Free of corrosive gases |
Vibration
Resistance |
<without HDD>
IEC61131-2 compliant
5 to 9Hz single-amplitude 3.5mm
9 to 150Hz constant-accelerated velocity 9.8m/s2
X, Y, Z directions for 10 cycle (100 minute)
<with HDD>
4.9m/s2 (10 to 25Hz X,Y,Z directions for 30 minute) |
Noise Immunity
(via noise simulator) |
Noise Voltage: 1,500Vp-p
Pulse Duration: 50ns, 500ns, 1µs
Rise Time: 1ns |
| Electrostatic Discharge Immunity |
6kV (complies with EN 61000-4-2 Level 3) |
| Grounding |
Grounding resistance of 100 Ω
2mm2or thicker wire,
or your country's applicable standard.
(Same for FG and SG terminals) |
| Structural |
Rating*1 |
Equivalent to IP65f
(only when not using front USB) |
Cooling
Method |
Forced cooling by unit fan |
| Weight |
Approx. 4.0kg [8.8lb] max. (unit only) |
| External Dimensions |
W230mm [9.06in.] × H177mm [6.97in.] × D120mm [4.72in.] |
|
| *1 |
The front face of the PS-A unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the PS-A unit's level of resistance is equivalent to these standards, oils that should have no effect on the
PSA can possibly harm the unit. This can occur in areas where either
vapourised oils are present or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the
PSA's front face protection sheet peels off, these conditions can lead to the ingress of oil into the
PSA and separate protection measures are suggested.
Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the
PSA, confirmation of the type of conditions that will be present in the
PSA's operating environment will be required.
If the installation gasket is used for a long period of
time or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed.
To maintain the original protection level, be sure to replace the installation gasket regularly. |
|
| |
| Expansion Slots |
 |
 |
| |
PS3450A - T41 only |
Board Size |
| 1st Slot |
PCI |
106.68mm [4.20in.]
×
174.63mm [6.88in.] |
| Power Supply |
DC5V: 1.0A, DC12V: 0.25A,
DC-12V: 0.1A, DC3.3V: 0.5A |
- |
|
| |
| External Dimensions Units: mm [in.] |
 |
 |
 |
| |
| Panel Cut Dimensions Unit: mm[in.] |
 |
 |
|
| |
- All product names used on this page are the registered trademarks of their respective companies.
- The unit's photos contained on this page may differ from those of the actual unit.
- All information on this page is valid from July 2007.
- All information contained on this page is subject to change without notice.
|
 |
Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.
|
|
|
 |
|
 |