 |
 |
|
 PS-3650A Features / Specifications |
|
 |
| Model: PS3650A-T41 |
 |
Intel® Celeron® M 1.3GHz |
 |
DDR: 256MB/512MB |
 |
12.1in. XGA (1024 x 768 dots)
TFT colour LCD |
|
-> Features |
|
-> Specifications |
|
 |
|
| |
|
| PC/AT
compatible panel computer |
|
| Allow HDD or CF card to startup |
|
| PCMCIA Type III x 1 |
|
| Memory
: 256/512MB |
|
| Supports
Windows(R)2000/Windows(R)XP |
|
| Expansion
Slot PCI Bus Support (1 slot) |
|
| AC100 to 240V
power supply |
|
| TFT liquid crystal (12.1in. XGA) |
|
| High
resolution (1024 x 768) with a touch
panel |
|
| Intel® Celeron® M 1.3GHz
CPU equipped. |
|
| Supports
touch
panel mouse emulation function |
|
| RAS
function |
|
| Replaceable
Backlight |
|
| Aluminium
die-cast body |
|
| Equivalent
to IP65f |
|
| UL, CSA
and CE marking standard |
|
| Build-to-order |
|
| PC/AT
standard I/F (COM x 1, USB x 5, LAN
x 2, RAS x 1, Speaker Out) |
|
| Supported RoHS Compliant |
|
|
| |
| Specifications |
| |
| Performance Specifications |
|
|
| |
PS3650A-T41 |
Supported OS
|
Windows(R) 2000 /
Windows(R) XP /
Windows(R) XP
Embedded (Under Development) |
| CPU |
Intel® Celeron® M 1.3GHz |
| L2 Cache Memory |
512KB (Built in the CPU) |
| Main Memory |
DDR256MB/ 512MB
(DIMM Socket x
1, 512MB max.) |
| BIOS |
FirstBIOS Pro (Phoenix Technologies Co.) |
| Graphics |
XGA (1024 × 768 dots) |
| Video Memory |
64MB max
(UMA Type) |
Display
Functions |
Type |
TFT Colour LCD |
| Resolution |
W1024 x H768 pixels |
| Dot pitch |
W0.24mm [0.01in.] x H0.24mm [0.01in.] |
| Effective Display Area |
W245.76mm [9.68in.] x H184.32mm [7.26in.] |
| Colour/Shade level |
262,144 colours |
| Backlight |
CFL (user replaceable) |
| Brightness control |
4 levels of adjustment |
| Contrast Adjustment |
None |
| View Angles |
Horizontal Direction : 120 degrees, Vertical Direction: 100 degrees(Contrast ratio: CR is 10 or greater, or TYP value) |
| Display Service Life |
50,000hrs.(at 25°C and 65%RH (humidity)) |
| Backlight Service Life |
50,000hrs. or more (at ambient temperature 25°C and continuous operation - period until backlight brightness decreases to 50% or backlight starts to flicker) |
Touch
Panel |
Type
|
Resistive Film (analog) |
| Resolution |
1024 x 1024 |
| Service Life |
1,000,000 times or more, Sweeping 100,000 times or more |
| Interfaces |
Serial
Interface |
COM1: RS-232C
Corresponding to IEA-232
Connector: D-SUB 9 pin (male)
(5V / RI switching available) |
Network
Interface |
Ethernet 2 ports
(Corresponding to IEEE802.3, 10BASE-T / 100BASE-TX automatic switching SIDE)
Connector: Modular Jack (RJ-45) |
| USB Interface |
Front face: USB 1.1
(Low / Full Speed 12 Mbps) × 1 port
Side face: USB 2.0 (High Speed 480 Mbps) × 4 ports
Connector: USB TYPE-A |
| RAS Interface |
Reset Input, Alarm Output, General Input 2ch, General Output 2ch
Connector: D-SUB 9 pin (female) |
| Speaker Output Interface |
Stereo Speaker output
Connector: Mini Pin Jack |
| IDE |
Ultra ATA100
Primary Master: 2.5 inch HD slot
Primary Slave: CF card slot (Type 2) |
| PCMCIA |
Corresponding to CARD BUS * |
| PCI |
PCI Rev. 2.2 (33MHz) 1 slot |
| * |
Excluding VIDEO ZOOM, SOUND functions |
|
|
| |
| General Specifications |
|
|
| |
PS3650A-T41 |
| Electrical |
Input Voltage |
AC100 / 240V |
| Rated Voltage |
AC85 to 265V |
| Rated Frequency |
50 / 60Hz |
| Allowable Voltage Drop |
2.0ms (max.) |
| Power Consumption |
110VA (100W) (max.) |
| leakage Current |
2.0mA (max.) |
| In-Rush Current |
For AC100V (Ambient Temperature) :30A(max.)
For AC240V (Ambient Temperature) :50A(max.) |
| Voltage Endurance |
AC1500V 20mA for 1 minute |
| Insulation Resistance |
DC500V 10MΩ (min.) |
| Environment |
Surrounding Air Temperature |
0°C to 50°C
(HDD use: 5 to 50°C) |
| Storage Temperature |
-10°C to +60°C |
| Ambient Humidity |
10%RH to 85%RH
(Wet bulb temperature: 29°C max. - no condensation.) |
| Storage Humidity |
10%RH to 85%RH
(Wet bulb temperature: 29°C max. - no condensation.) |
| Dust |
Free of dust |
| Pollution Degree |
Pollution Degree 2 |
| Corrosive gas |
Free of corrosive gas |
Atmosphere
(Using height) |
800 to 1114hPa
(-300 to 2000m) |
| Vibration Resistance |
<When not using HDD>
IEC61131-2 compliant
5Hz to 9Hz single-amplitude 3.5mm
9Hz to 150Hz constant-accelerated velocity 9.8m/s2
X, Y, Z directions 10 time (100minutes)
<When using HDD>
4.9m/s2 10Hz to 25Hz
X, Y, Z directions (30min. each) |
Noise Immunity
(via noise simulator) |
Noise Voltage: 1,500Vp-p
Pulse Duration: 50ns, 500ns, 1µs
Rise Time: 1ns |
| Electrostatic Discharge Immunity |
6kV (complies with IEC61000-4-2 Level 3) |
Noise Immunity
(Fast Transient Burst Noise) |
Power supply line : 2kV (IEC61000-4-4)
COM port: 1kV (IEC61000-4-4) |
| Structural |
Grounding |
Grounding resistance of 100 Ω,
2mm2 [0.0062inch2] or thicker wire,
or your country’s applicable standard.
(Same for FG and SG terminals) |
| Structure |
Rating*1: Equivalent to IP65f
(Only not using Front USB)
Figuration: Bult-in type
Installation method: Embedding |
| Cooling Method |
Forced cooling by CPU fan |
| Weight |
Approx. 4.5kg [9.9lb] (unit only) |
| External Dimensions |
W313mm [12.32in.] × H239mm [9.41in.] × D103mm [4.06in.] |
|
| *1 |
The front face of the PS-A unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the PS-A unit’s level of resistance is equivalent to these standards, oils that should have no effect on the PS-A can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the PS-A’s front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the PS-A and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel’s plastic cover. Therefore, prior to installing the PS-A be sure to confirm the type of conditions that will be present in the PS-A’s operating environment.
If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly. |
|
| |
| Expansion Slots |
|
|
| Slot Type |
PCI 2.2 (5V) |
| Size |
174.63mm [6.88in.] × 106.68mm [4.20in.] |
| Output Voltage |
DC5V |
DC12V |
DC-12V |
DC3.3V |
| Consumption Current |
1.5A |
0.5A |
0.1A |
0.5A |
|
| |
| External Dimensions Units: mm [in.] |
|
|
 |
| |
| Parts Names |
|
|
| |
 |
| A: |
Display
Displays PS-A unit screen data. |
| B: |
Touch Panel
Provides “mouse-less” screen control. |
| C: |
Power LED / RAS Status lamp (POWER)
This status LED indicates the electric conduction status and operation status. The following table shows the display
colours and corresponding status. |
| |
| LED |
PS-A Status |
| Green (lit) |
Normal operation (power is ON). |
| Green (blinking) |
System is NOT running (Soft OFF state). |
| Orange (lit) |
System monitor error / Touch panel SELF TEST error. |
| Orange/ Red (blinking) |
Backlight error. |
| Lit off |
Power is OFF. |
|
|
| D: |
HDD/IDE Access lamp (DISK) |
| |
| LED |
PS-A Status |
| Green (lit) |
Access to HDD or IDE. |
| Lit off |
Not access to HDD or IDE. |
|
|
| E: |
Front Cover
When you opened it, there are a Hard Ware Reset Switch (RESET) and a USB connector (corresponding to USB Ver.1.1) inside. |
| F: |
Power switch |
| G: |
Power supply connectorFor connection, put a power plug, which is together in the package, into the power cable. |
| H: |
Mask Cover |
| I: |
RS-232C/485 converting unit hook holes |
| J: |
Expansion Board Base |
| K: |
Expansion Board Cover |
| L: |
Expansion Board Support |
| M: |
Fan Cover |
| P: |
USB Interface (USB)This interface corresponds to USB Ver.2.0. It uses TYPE-A connector. It connects to the devices corresponding to USB. |
| Q: |
PCMCIA Slot Cover |
| R: |
Ethernet Interface (LAN)
This interface corresponds to IEEE802.3, the Ethernet protocol (10BASE-T/100BASE-TX). It uses a modular jack connector which is RJ-45 type (Octupole). |
| S: |
Speaker Output Interface
It connects to the Speaker. |
| T: |
RAS interface (RAS) |
| U: |
Serial Interface (COM1)
(R1/+5V Switching available) |
| V: |
CF Card Cover |
| W: |
Expansion Slot
This is a slot that is mounted on a PCI board. |
|
|
| |
- All product names used in this page are the registered trademarks of their respective companies.
- The unit's photos contained in this page may differ from those of the actual unit.
- All information in this page is valid in Mar, 2006.
- All information contained in this page is subject to change without notice.
|
 |
Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.
|
|
|
|
|
|
