|
Xycom Automation industrial computers
(IPCs) are
designed to provide processing power and versatility. The 4115T
IPC offers a powerful processor with a wide range of features
and an expansion slot. The 4115T also meets the rigorous
requirements of the plant floor with a high-resolution LCD flat
panel display in a rugged housing ideal for today's
manufacturing environment.  Features
Higher Performance
The 2.0 GHz Intel
Pentium 4 CPU with 512 KB cache and 533 MHz system
bus drives the fastest and most demanding
applications.
Pre-loaded
Operating Systems
All 4115T systems come
standard with either Windows 2000 or Windows XP
pre-loaded. The unit is also available with no
operating system.
Sharp,
Easy-to-Read Displays
A bright 15" TFT
screen can display complex operations with
clarity.
Full Compliment of
I/O Ports
The
4115T comes standard with an extensive array of
I/O ports, including two high-speed RS-232 ports,
one configurable RS-232/422/485 port, one parallel
port, two USB 2.0 ports, PS/2 mouse & keyboard
ports, one 10/100 Mbps Ethernet port, one VGA
port, and audio I/O (input, output, and mic).
The VGA port can be used to connect a VGA monitor.
The built-in display and an external monitor can
be used simultaneously (both showing the same
image).
Cooling
Enhancements
The
4115T has a faster, more powerful CPU which
generates more heat than units with lesser
performing CPUs. Using Xycom's expertise and
experience, we have added a secondary system fan,
more LCD venting, and a direct CPU vent channel to
dissipate the extra heat.
When installing a higher performing CPU equipped
unit into an enclosure, extra care should be
exercised to ensure that the ambient air around
the unit (inside your enclosure, not outside the
enclosure) does not exceed 50° C. Exceeding 50°
C may cause premature degeneration of the unit.
Consult your enclosure manufacturer for proper
sizing and/or cooling options. The product
specifications and ratings section of this
datasheet contains information your enclosure
manufacturer will require.
ADDITIONAL
FEATURES
- 15" flat
panel TFT XGA (1024x768) colour display
- Analog
resistive touchscreen
- Intel®
Pentium® 4, 2.0 GHz CPU, 512 KB cache, 533
MHz system bus
- 4x AGP Video
Controller with up to 64 MB Video RAM
(shared with system RAM, 8 MB base)
- Up to 1 GB
DRAM (256 MB std)
- VGA port for
remote monitor
- Supports using
remote monitor and built-in display
simultaneously
- Preloaded with
Windows® 2000 operating system (option to
load Windows® XP*)
- One
half-length PCI expansion slot
- 40 GB internal
hard drive
- Side
accessible 1.44 MB floppy drive and CD-ROM
drive (with CD-R/W, DVD, and DVD-R/W upgrade
options)
- Type II
CompactFlash™ card slot (can accommodate
IBM Microdrive™)
- Two RS-232
ports
- One
configurable RS-232/422/485 port
- Parallel port
- Two USB 2.0
ports
- 10/100 BaseT
Ethernet
- Audio
input/output/mic
- PS/2 keyboard
& mouse ports
- Software
programmable watchdog timer
- Mounted with
mounting clips or standard 75/100 mm VESA
arm
- Power cable
and drivers included
- 100-240 V AC
power supply
- NEMA 4/4X/12,
IP65 front panel
- 1-year
warranty
* Important Notice for XP configurations:
Certain Microsoft® software product(s) included
with this computer may use technological
measures for copy protection. IN SUCH EVENT, YOU
WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO
NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION
PROCEDURES. Product activation procedures and
Microsoft's privacy policy will be detailed
during initial launch of the product, or upon
certain reinstallations of the software
product(s) or reconfigurations of this computer,
or may be completed by Internet or telephone
(toll charges may apply).
|
