|
Xycom Automation's
newest generation of industrial PCs are designed
and tested for the tough environments required
for plant floor use.
Xycom's standard PC
configurations meet the strict specifications
required for use in hazardous locations and
Europe's CE mark. Based on CPU boards designed
specifically for industrial automation, these
systems provide the capabilities required by
demanding applications. With an installed base
of over 300,000 systems, our industrial PC
products are successfully applied in
manufacturing and process environments
world-wide.
Higher
Performance, Lower Power
The 4612 utilises an
Intel mobile processor providing superior
processing power while utilising half the
wattage of a comparable Pentium 4 Processor. The
optional Pentium M 2.0 GHz processor (2 M CACHE
& 533 MHz system bus) outperforms a desktop
Pentium 4 2.4 GHz (512 K CACHE & 533 MHz
bus) whilst utilising less than half the
wattage. With less wattage input the ambient
operating temperature is more easily maintained,
possibly without the need for expansive
enclosure cooling devices. This makes the 4612
ideal for applications which require a NEMA
sealed enclosure.
Easy-to-Read
Display
The 4612 unit utilises bright TFT
LCD flat panel displays. Complex operations and
screens can be displayed with clarity. The 4612
unit incorporates a 12.1" SVGA (800 x 600)
resolution, with on-board 4X AGP graphics
controller defaults to 4 MB system RAM to allow
resolutions up to 1280 x 1024. In addition, the
4612 unit automatically shares up to 32 MB
system RAM to allow full 32-bit colour depth and
fast 3D rendering.
Fits Your Needs
The 4612 can be
configured many different ways. With four
available expansion slots, many cost effective,
industry standard options are easily integrated.
The optional dual hard drive, externally
accessible CompactFlash, or RAID-enabled
configuration provides the storage solution you
require. Additionally the CD-ROM can be upgraded
to CD-R/W or DVD-R/W providing even more storage
and/or backup options.
Meets High
Standards
To survive on the
plant floor, the 4612 meets FCC, UL, cUL, and
European CE mark requirements for industrial
automation equipment. Xycom Automation leads the
industry in reliability, service, and support
with an optional five year warranty available.
FEATURES
Serviceability
The 4612 CPU section
easily removes from the front panel and display
unit without having to detach the front panel
from the NEMA enclosure. The rear CPU section
can be replaced with another very quickly. With
the cover removed expansion cards are easily
installed without cumbersome cables to contend
with.
Easily
Replaceable Hard Drive
The 4612 units have
incorporated an easy access hard drive mount.
Simply loosen two captive screws and extract the
hard drive. No cables to install or connect;
simply plug in the new drive. Optional dual hard
drives or RAID-enabled configurations are also
available.
Storage Options
The 4612 offers
several data storage options. The standard unit
contains a single Serial ATA hard drive. Dual
drives are optional, as well as a RAID-enabled
configuration. Also, the externally accessible
Type I/II CompactFlash can be used to further
enhance your storage capabilities. The
CompactFlash can be ordered with the operating
system pre-loaded for a solid state alternative.
The 4612 offers a read-only CD-ROM, R/W, or a
floppy for your choice of removable media
drives. In addition, the 4 USB 2.0 ports (one
additional 1.1 compliant port on front of KPM
units) can be utilized to add many commercially
available external devices.
 |
ADDITIONAL
FEATURES
- 12.1"
SVGA TFT colour flat panel
- Re-programmable
keypad with integrated mouse,
touchscreen only, or both
- Intel
Celeron M 1.3 GHz, 512 cache,
400 MHz system bus (optional
Pentium M 2.0 GHz, 2M cache,
533 MHz system bus)
- Up
to 2 GB DRAM (512 MB standard)
- 40
GB minimum Serial ATA hard
drive (optional dual hard
drives)
- 4X
AGP graphics with 32 MB video
memory (shared with system
memory)
- Four
available expansion slots:
- One
(8.0" max.) PCI
expansion slot;
- Two
(9.0" max.) PCI
expansion slots;
- One
(9.0"max.) PCI or ISA
expansion slot
- 10/100
and 10/100/1000 BaseT Ethernet
- Four
USB 2.0 compliant ports (one
additional 1.1 compatible port
on front of KPM units)
- Three
Serial, one Parallel, and one
Video port
- Rear
accessible Type I/II
CompactFlash socket
- CD-ROM
(optional CD-R/W with DVD-read-only,
DVD-R/W, and floppy)
- NEMA
4/4x/12 front panel
- UL,
cUL, CE approvals
- UL
listed for hazardous
locations: Class I Division 2,
Groups A, B, C, D; Class II
Division 2, Groups F and G
- Windows
XP and 2000 operating system
- 100-240
VAC power supply
- 2-year
warranty included
Important
Notice for Windows® XP
configurations: Certain
Microsoft® software product(s)
included with this computer
may use technological measures
for copy protection. IN SUCH
EVENT, YOU WILL NOT BE ABLE TO
USE THE PRODUCT IF YOU DO NOT
FULLY COMPLY WITH THE PRODUCT
ACTIVATION PROCEDURES. Product
activation procedures and
Microsoft's privacy policy
will be detailed during
initial launch of the product,
or upon certain
reinstallations of the
software product(s) or
reconfigurations of this
computer, or may be completed
by Internet or telephone (toll
charges may apply).
|
| |
|
|
