 |
Xycom Automation's
newest generation of industrial PCs are designed
and tested for the tough environments required
for plant floor use.
Xycom's standard PC
configurations meet the strict specifications
required for use in hazardous locations and
Europe's CE mark. Based on CPU boards designed
specifically for industrial automation, these
systems provide the capabilities required by
demanding applications. With an installed base
of over 300,000 systems, our industrial PC
products are successfully applied in
manufacturing and process environments
world-wide.
|
|
Higher
Performance, Lower Power
The 4715 utilises an
Intel mobile processor providing superior
processing power whilst utilising half the
wattage of a comparable Pentium 4 Processor. The
optional Pentium M 2.0 GHz processor (2 M CACHE
& 533 MHz system bus) outperforms a desktop
Pentium 4 2.4 GHz (512 K CACHE & 533 MHz
bus) and uses less than half the wattage. With
less wattage input, the ambient operating
temperature is more easily maintained, possibly
without the need for expansive enclosure cooling
devices. This makes the 4700 series ideal for
applications which require a NEMA sealed
enclosure.
Easy-to-Read
Display
The 4715 units have
bright TFT LCD flat panel displays. Complex
operations and screens can be displayed with
clarity. The 4715 units incorporate a 15.0"
XGA (1024 x 768) resolution. The on-board 4X AGP
graphics controller defaults to 4 MB system RAM
to allow resolutions up to 1280 x 1024. In
addition, the 4715 units automatically share up
to 32 MB system RAM to allow full 32-bit colour
depth and fast 3D rendering.
Fits Your Needs
The 4715 can be
configured many different ways. With four
available expansion slots, many cost effective,
industry standard options are easily integrated.
The optional dual hard drive, externally
accessible CompactFlash, or RAID-enabled
configuration provides the storage solution you
require. Additionally the CD-ROM can be upgraded
to CD-R/W or DVD-R/W providing even more storage
and/or backup options.
Meets High
Standards
To survive on the
plant floor, the 4700 series meet FCC, UL, cUL,
and European CE mark requirements for industrial
automation equipment. Xycom Automation leads the
industry in reliability, service and support
with an optional five year warranty available.
FEATURES
Serviceability
The 4700 series CPU
section easily removes from the front panel and
display unit without having to detach the front
panel from the NEMA enclosure. The rear CPU
section can be replaced with another very
quickly. With the cover removed, expansion cards
are easily installed without cumbersome cables
to contend with.
Easily
Replaceable Hard Drive
The 4715 unit has
incorporated an easy access hard drive mount.
Simply loosen two captive screws and extract the
hard drive. No cables to install or connect;
simply plug in the new drive. Optional dual hard
drives or RAID-enabled configurations are also
available.
Storage Options
The 4700 series
offers several data storage options. The
standard unit contains a single Serial ATA hard
drive. Dual drives are optional as well as a
RAID-enabled configuration. Also, the externally
accessible Type I/II CompactFlash can be used to
further enhance your storage capabilities. The
CompactFlash can be ordered with the operating
system pre-loaded for a solid state alternative.
The 4700 series offers a read-only CD-ROM, R/W,
or a floppy for your choice of removable media
drives. In addition, the 4 USB 2.0 ports (one
additional 1.1 compliant port on front of KPM
units) can be utilised to add many commercially
available external devices
 |
ADDITIONAL
FEATURES
- 15.0"
XGA TFT colour flat panel
- Re-programmable
keypad with integrated mouse,
touchscreen only, or both
- Intel
Celeron M 1.3 GHz, 512 cache, 400 MHz
system bus (optional Pentium M 2.0
GHz, 2M cache, 533 MHz system bus)
- Up to 2
GB DRAM (512 MB standard)
- 40 GB
minimum Serial ATA hard drive
(optional dual hard drives)
- 4X AGP
graphics with 32 MB video memory
(shared with system memory)
- Four
available expansion slots:
- Three
PCI expansion slot;
- One
PCI or ISA expansion slot;
- 10/100
and 10/100/1000 BaseT Ethernet
- Four USB
2.0 compliant ports (one additional
1.1 compatible port on front of KPM
units)
- Three
Serial, one Parallel and one Video
port
- Rear
accessible Type I/II CompactFlash
socket
- CD-ROM
(optional CD-R/W with DVD-read-only,
DVD-R/W, and floppy)
- NEMA
4/4x/12 front panel
- UL, cUL,
CE approvals
- UL
listed for hazardous locations: Class
I Division 2, Groups A, B, C, D; Class
II Division 2, Groups F and G
- Windows
XP and 2000 operating system
- 250 Watt
AC power supply, 24 VDC power supply
- 2-year
warranty included
Important Notice for Windows® XP
configurations: Certain Microsoft®
software product(s) included with this
computer may use technological
measures for copy protection. IN SUCH
EVENT, YOU WILL NOT BE ABLE TO USE THE
PRODUCT IF YOU DO NOT FULLY COMPLY
WITH THE PRODUCT ACTIVATION
PROCEDURES. Product activation
procedures and Microsoft's privacy
policy will be detailed during initial
launch of the product, or upon certain
reinstallations of the software
product(s) or re-configurations of
this computer, or may be completed by
Internet or telephone (phone charges
may apply).
|
|
