XIP-2470 Industrial I/O Pack (IP) modules provide 48 general-purpose, bi-directional I/O points to economically monitor and control a large quantity of digital devices.

Each channel has interrupt capability for detecting low-to-high or high-to-low transitions. Change-of-state interrupts are supported using paired channels. Debounce eliminates interrupts from noise and switching transients for error-free edge detection.

XIP-2470 outputs are full-featured. They have socketed pull-ups and provide closed-loop readback status monitoring. TTL level thresholds and 15mA sink capability allow a direct interface to standard relay racks. And for safety, outputs go to a failsafe state upon power-up/reset without any instantaneous toggling to prevent false alarms.

XIP-2470 Features:

• Forty-eight bi-directional input/output channels
• TTL-compatible inputs
• CMOS-compatible open-drain outputs
• Interrupt support for each channel
• Input hysteresis/programmable debounce
• Electronic overvoltage protection on individual channels
• Open drain outputs with socketed pull-ups
• Output readback registers

Benefits:

• Output readback capability eliminates the need for additional input channels to verify the output channel state.
• Pinouts are compatible with industry-standard isolated I/O racks.
• Output channels do not "glitch" after a power-up/reset to eliminate false alarms.

REFERENCE LIBRARY:

XIP-2470 Datasheet