The XVME-9670 is a nonintelligent slave boards that interfaces four IP modules to the VMEbus. This full-height (6U) board uses VME64-compliant connectors to increase the quantity of rear I/O connections beyond standard VME. Although the rear connectors are VME64, the electrical interface is standard VME A24/A16, which means that nearly all CPU products (VME64 or not) can still enjoy full access to the IP modules.

When used with a VME64 backplane, the XVME-9670 brings all 200 I/O points out the rear P0 and P2 connectors. This convenience eliminates messy cables from hanging out the front of the cage. In addition to a cleaner cage design, it is also much easier to insert and replace boards into the system.

The only requirement is substitution of a VME64 backplane for the standard VME backplane in your system. With Xycom Automation's 80mm transition module (XIP-90200-000), all 200 I/O points are easily ported out the back of the cage.

Operation

Xycom Automation's carrier boards provide full data access to the IP module's I/O, ID and memory spaces. With full access to the programmable registers, you can easily configure and control the operation of the IP modules from the VMEbus.

Up to two interrupt requests are supported for each IP module. The VMEbus interrupt level is software programmable.

Individual passive filters on each IP module power supply line provide optimum filtering and isolation between the IP modules and the carrier board.

XIP-9670 Features:

• Four ANSI/VITA 4-IP module slots
• 200 I/O points with rear access
• VME64x high-density rear connectors
• Compatibility with most CPUs (VME A24/A16)
• Two interrupts per IP module
• Individually filtered and fused power to each IP
• Front panel LEDs

Benefits:

• Clean system cabling
• Easy board replacement
• Simplified debugging with status LEDs

REFERENCE LIBRARY:

XVME-9670 Datasheet

XVME-9670 User Manual